Electric Ammonia Vaporizer 2022. The primary function of most ammonia vaporizer systems is to provide a supply of ammonia vapor adequate for a specific requirement. It is vaporized and sent to downstream equipment after liquid/vapor separation.
Ammonia Vaporization Systems Process Heating Solutions from www.thermon.com
Units are available for use with all industrial gases such as oxygen, nitrogen, argon, lng, ammonia and carbon dioxide co2 as well as other specialized and exotic gases. 20 to 550 lb/hr of aqueous ammonia; However, gaseous ammonia is required in production of fertilizers, nitric acid and cyanides.
Electric Heated And Water Bath Type.
An aqueous ammonia vaporizer is commonly constructed as a spray evaporation type. It is vaporized and sent to downstream equipment after liquid/vapor separation. Electric vaporizer 5,000nm3/h lpg mixing station & 3,500kg/h lpg electric vaporizer at samsung factory cni executed an epc project of an lpg/air mixing station as a backup for the cng supplying system in samsung factory, including tanks, piping system & equipment.
19%, 24%, 29%) Capacities Ranging From 0.62 Lbs/Hr To 1650 Lbs/Hr.
Liquid anhydrous ammonia flows into the vaporizer housing where the electrical immersion heater is located. The key here is “vaporized” ammonia. Since the discharge rate from the cylinders and ton containers are very low, an ammonia vaporizer is used.
This Is Accomplished By The Vaporization Of Liquid.
Electric heating with water bath type (heating medium: Compared to h2o that vaporizes at 100℃, ammonia generates a large amount of heat exchange at a low temperature of minus 33.4 ℃, and thus it is also used as a refrigerant.on the other hand, due to the large heat exchange of vaporization, if the heat source is not sufficient, vaporization becomes unstable. 2.18mpa (21.8bar) explosion proof :
Steam, Electric, Glycol And Hot Flue Gas Vaporizers Available Pdf Download Featured Projects Alt Ammonia Denox Products Ammonia Flow Control Unit Feedback Vaporizer Ammonia Injection Grid Ammonia Storage Tanks Ammonia Forwarding Pumps Interconnecting Piping Unloading Units Vaporizers Flow Control Skids
Power™ p electric anhydrous ammonia vaporizer. Electric heated anhydrous ammonia vaporizer has a stainless steel electric heater, which supplies heat to heating medium (water). A series of electrically heated vaporizers and trim heaters designed specifically for medium to high flow rates utilizing standard electrical power.
Use Of Electric Heat, Steam, And Hot Flue Gas Recirculation.
Anhydrous ammonia will absorb heat from heating medium when it passes through coils immersed in water. Vertical vaporizers can provide process throughput from 50kg to 2500 kg per hour using steam or hot water or heat transfer fluids as the heating medium. Ammonia vaporization systems are designed for changing the state of anhydrous and aqueous ammonia from liquid to gas form while maintaining the desired pressure conditions and delivering the gas vapors to selective catalytic reduction (scr) reactors.
0 comments